Piano Care

FAQs

What are the basic rules of piano care?

Keep your piano in tune. It was specifically designed to be tuned to the international pitch standard of A-440 cycles per second. Your piano will sound its best and give you and your family the most pleasure when it is tuned regularly and kept in proper playing condition.

Keep your piano clean. Keep the keyboard covered when not in use to prevent dust from accumulating (although ivory keys need some exposure to light to prevent yellowing). Clean keys by occasionally wiping them with a damp cloth and drying them immediately. If accumulated debris can't be removed with a damp cloth, try wiping the cloth on a bar of mild soap or moisten with dishwashing detergent before wiping. Do not use chemicals or solvents to clean piano keys. Call a qualified piano technician to remove anything from the keys you can't wipe away.

To maintain the piano's finish, you may wipe the case with a damp cotton cloth to remove fingerprints, or polish with a reliable emulsion-type, water-based solution following the manufacturer's instructions. Avoid aerosol spray polishes that contain silicone. Your technician may suggest a specific brand name.

The maintenance of the inner working of the piano and regulation should be left to a qualified piano technician. Resist dusting the inside of your piano, oiling the moving parts, or using moth or insect repellents. Your piano technician will take care of all internal problems.

Try to maintain a fairly consistent temperature and humidity control in the room where your piano is placed. It's important to keep your piano away from a heating register in winter, an air conditioning vent in the summer, a fireplace, a frequently opened window or outside door, and direct sunlight.

Play your piano regularly. You'll get the most enjoyment from it and also reach your potential much faster. A disadvantage to idle pianos, assuming they also suffer a service lapse, is that a detrimental condition or environment can't be identified, and an escalating problem can result in damage that might not have occurred with regular service. Tuning a piano after years of not having been tuned often requires a pitch raise. As a piano ages, it may begin to develop more major problems which your technician can help you assess. You may look into rebuilding or reconditioning the piano.

Keep all drinks and standing liquid containers off the piano. Should spilled water reach the action, notify you piano technician immediately. In many case, once liquids are spilled, the damage is irreversible which is why prevention is the safest rule to follow.

Select a piano technician with care. It's not only important that the service person be competent to perform tuning, regulation and repairs, but also that the person be someone you feel comfortable calling with questions concerning your piano's performance. Hiring a Registered Piano Technician who is committed to comprehensive service for your piano, and not just an occasional tuning, is your best assurance.

Do not perform repairs yourself. Though a problem may appear easy to solve (such as replacing a loose key ivory), a qualified technician will have the proper tools and parts to make repairs quickly and correctly. It's important to remember that unsuccessful amateur repairs are usually much more expensive to fix than the initial problem and may decrease the value of your instrument.

Use only a professional piano mover to move your piano. You will avoid injury to yourself, your instrument, and your home.

What is a Registered Piano Technician (RPT)

The field of piano technology is an unregulated trade. Therefore the Piano Technicians Guild has set its own standards of quality for piano technicians. The Guild has two types of members: Registered Piano Technicians and Associates. Associate membership is open to anyone with a "professional or avocational interest in piano technology." On the other hand, the title of "Registered Piano Technician" must be earned by passing a series of examinations.

To attain the RPT classification, a PTG members must pass three examinations. A written exam tests basic knowledge of piano design, tuning theory, repair techniques and various other topics relevant to piano technology. Two separate practical, hands-on exams test tuning and technical skills. The practical exams are administered by panels of RPTs under the leadership of examiners trained and certified in standardized exam procedures. Exam procedures are designed to comply with standards of objectivity mandated by US anti-trust legislation, thus assuring that exams are fair and equivalent regardless of where or by whom they are administered. On the tuning exam the candidate must match as closely as possible a "master tuning" created by a panel of examiners who have agreed - after painstaking experimentation and analysis - on an optimal tuning for the test piano. The exam is scored by using extremely sensitive electronic equipment to measure the deviation of the candidate's tuning from the standard thus established. Candidates who use electronic tuning devices in their work must nevertheless demonstrate their ability to tune by ear, unaided by electronics. The technical exam requires the candidate to demonstrate professional-level skills in assembling a grand and a vertical piano action (the mechanical component of the piano) and in making all the complicated adjustments (called "regulation") so that they function properly. The candidate must also demonstrate facility in various common repairs involving wood, cloth, felt, piano wire and other materials commonly used in pianos. All the procedures on these exams must be completed in prescribed time periods - thus demonstrating the fluency required of a professional.

What does it mean to tune a piano?

Piano tuning is the aligning of the musical pitch of the various notes of the piano, by adjusting the tension of the piano's strings, in order to achieve a desired musical effect. Preferences in desired musical effects and methods in achieving those preferences will vary. Piano "tuning" does not involve the functioning of a piano's key mechanism. (The "tune-up" of an automobile engine may involve keeping machinery running smoothly, but piano "tuning" by itself does not.)

What does "pitch raising" mean? Why is this extra service required?

Your piano is designed to sound its best when tuned to A-440 (A above middle C vibrates at 440 cycles per second), the international pitch standard. At this pitch, power and tonal range are optimum and your piano will match the pitch of other instruments. When your piano varies from A-440, pitch adjustments are required to bring it back to standard. By always maintaining your piano at standard pitch, you create long-term tuning stability because the strings and structure stay in equilibrium. You also ensure proper ear training because you always hear your music in the correct key.

Why does a piano's pitch change?

Piano strings change pitch for two primary reasons: the initial stretching and settling of strings when the piano is new, and soundboard movement due to humidity variation. In the case of new pianos, the pitch drops quickly for the first couple of years as the new strings stretch and wood parts settle. It's very important to maintain any new piano at the proper pitch during this period, so the string tension and piano structure can reach a stable equilibrium. (Most piano manufacturers recommend three to four tunings the first year, and at least two per year after that.) Aside from this initial settling, climate change is the main cause of pitch change. That's because the piano's main acoustical structure -- the soundboard -- is made of wood. While wooden soundboards produce a wonderful sound, they also react constantly to climate changes. As the relative humidity goes up, the soundboard swells, increasing its crowned shape and stretching the piano's strings to a higher pitch. Then during dry times the soundboard flattens out, lowering tension on the strings and causing the pitch to drop. The drop in the dry season tends to exceed the rise during humid times, so the net result is a drop in pitch each year that the piano isn't serviced.

Won't tuning restore my piano's pitch to A-440?

If a piano has gone without tuning for an extended period, its pitch may have dropped far below A- 440. This means that each of its approximately 220 strings needs to be tightened considerably, adding tremendous additional tension to the piano's structure. The problem is that as each string is tightened, the additional load causes the pitch of previously adjusted strings to change. Thus it is impossible to make a substantial change in pitch and end up with a fine, accurate tuning in one step. Instead, a process called "pitch raising" must first be done, in which all strings are raised to their correct average tension levels. (Likewise, when a piano's pitch is higher than standard, a pitch lowering procedure must be done to reduce string tensions to approximately correct levels.) Only then can the piano be accurately tuned. In other words, accurate tuning is only possible when all strings are so close to their proper tension that only small further changes are needed during tuning. These small changes then do not disturb the tuning of other strings.

How far from standard pitch must a piano be before a pitch raise is necessary?

Just when a pitch raise or lowering is necessary depends upon how accurate the final tuning must be, and the size and quality of the piano. Any net change in a piano's string tension during tuning will distort the final result and reduce stability. Realistically, a pitch difference of a few percent can usually be accommodated successfully during tuning. For average situations, when a piano's pitch is noticeably different from that of other standard pitched instruments, a pitch correction procedure is necessary before tuning. Whenever exact pitch level is critical, such as in concert or recording instruments, any pitch deviation must be corrected before tuning.

How long does a pitch raise take?

A pitch raise is essentially a special tuning procedure designed to leave the piano approximately in tune. For moderate pitch corrections the procedure takes about the same time as a tuning, or less. Extreme pitch changes may require two separate pitch adjustments. The pitch adjustment and subsequent tuning may be done in one visit, or the tuning may be scheduled for a short time later depending upon how far the pitch had to be changed. In general, the longer a piano has gone without regular service, the more tunings will be required to reestablish tuning stability. Like your car, your piano is a major investment which deserves regular servicing to keep it working well and preserve its value. Most importantly, the well-maintained piano sounds better, plays better, and gives you and your family a wealth of musical pleasure.

What is regulation and how does it affect my piano's performance?

Regulation is the adjustment of the mechanical aspects of the pianos to compensate for the effects of wear, the compacting and settling of cloth, felt, and buckskin, as well as dimensional changes in wood and wool parts due to changes in humidity.

The three systems involved in regulation are the action trapwork and damper system. The action is the mechanical part of the piano that transfers the motion of the fingers on the keys to the hammers that strike the strings. It is comprised of over 9,000 parts which require adjustment to critical tolerances to be able to respond to a pianist's every command. The trapwork is the assemblage of levers, dowels and springs that connects the pedals to the action affecting sustain and dynamics. The damper system is the mechanical part of the piano that stops the vibration of the string when you release the key and is controlled by the key and pedal systems.

If I have my piano tuned regularly, why do I need to have it regulated?

While tuning corrects the pitch of your piano, it is only one component of a complete maintenance program. Regulation attends to the touch and uniform responsiveness of your action, all vital to making each performance pleasurable. In addition, regulation ensures that your instrument is capable of producing a wide dynamic range -- a critical factor, particularly in pianissimo passages.

Do all pianos need to be regulated?

How often is regulation needed?

Only you and your technician together should decide how frequently your piano needs regulation. Several factors can contribute to this. The intensity and number of hours your instrument is played, and climatic conditions are all determinants. A piano kept in relatively consistent conditions which are neither too wet nor dry, optimally at a temperature of 68 degrees Fahrenheit and 42 percent relative humidity, will require less adjustment.

The quality of the instrument itself also can affect frequency of regulation. Some manufacturers decrease costs by not going over the regulation and voicing processes in the factory as much as needed. Reputable retailers sometimes do the necessary regulation themselves prior to selling the pianos, but others do not.

Also, performance instruments may require some regulation before each use, due to the higher demands placed on them.

What are the signs that my piano needs regulation?

Tuning is the adjustment of the tension of all of your piano's 220 (or more) strings to the correct pitch or frequency. This ensures that notes played in a musical interval (octaves, chords, etc.) will sound in harmony. Voicing is the adjustment of a piano's tone or quality of sound. Tone can be changed without affecting the pitch. For example, turning the bass or treble knobs on your stereo changes the tone but does not alter the notes the musician recorded. A skilled piano technician can voice a piano to change its tonal personality from mellow to bright or robust to delicate. The degree of change possible depends upon the piano's design and condition.

What is good tone?

Tone varies, even among pianos of the same make and model. No matter what its size or cost, any good piano should provide a wide range of tone, from soft and sweet to loud and bright. The tone should be even from the lowest to the highest notes. Most of all, it should sound musical. What does the perfect piano tone sound like? There is no single answer, because everyone's taste varies. Also, certain tonal characteristics are more suited to specific styles of music. A bright, lively tone might be best for jazz, whereas you might prefer a rich and dark sound for Beethoven's music. There are many different sizes and models of piano available in the market place; you chose your piano because it sounded good to you. But a piano's tone changes with use. As the hammers wear and compact, the tone often becomes too bright and harsh, robbing the pianist of the ability to produce a sweet sound. As parts wear, the regulation (adjustment of the mechanical parts that transmit motion from the fingers to the hammers) becomes uneven, and the pianist loses control over volume and tone. This is most noticeable in quiet playing. A delicate pianissimo passage becomes very difficult or impossible to play, and some keys may not sound at all if played very lightly. Aging of the piano's strings and structure also can diminish its tone. Other factors that affect the sound you hear from your piano are:

ROOM ACOUSTICS — Hard shiny surfaces such as windows and bare floors reflect high frequencies, making a piano sound bright and loud. High ceilings or large adjoining rooms add resonance. Rugs and upholstered furniture soften tone and add warmth.
THE LID — Both grands and verticals sound louder and brighter if the lid is opened.
YOU — Your ears are sensitive, and will perceive sound differently if you have spent all day in a quiet office or at a loud construction site.

Does my piano need voicing?

Your piano may benefit from voicing if:

Your piano sounds different than when you purchased it.
You don't like the sound even after it has been tuned.
Tone varies radically from note to note.
You cannot achieve a range of tone (mellow to bright) at different volumes.
The piano has lost its ability to play softly.

Before deciding if a new piano needs voicing, make sure it is well-tuned and well-regulated. Then, play a wide variety of music on it. Most voicing procedures are long-lasting, so give yourself some time to explore the sound of a new instrument before deciding to change it. How often voicing is needed depends upon the piano's usage and its intended audience. Pianos in concert halls and recording studios often receive minor refinement of the voicing before each performance. A home piano may need some initial voicing to customize it to the owner's taste, then once every one to five years to maintain its tone. Your piano and your musical needs are unique -- your own schedule for periodic voicing is a matter for you and your technician to decide. To find out how voicing might improve the tone of your piano, ask for a demonstration on one or two notes.

How does a technician voice a piano?

Before you or your technician can fully evaluate then tone of your piano, it must be well-tuned. Tuning is the first step in improving the sound of any piano and may actually provide the tone you desire. If the tone is still not satisfactory. your technician will inspect the action, hammers and strings. If these components are severely worn, major repairs may be required before an improved tone is possible.

Moderately worn hammers can be re-shaped with sandpaper to remove string grooves and restore their original rounded shape. Next, the hammers are aligned to strike each string squarely.
Action regulation should be checked or adjusted. This ensures an even, powerful response from each key.
If tuning, hammer shaping and regulation are correct, the tone probably will be balanced but still may be too bright or mellow for your taste. If so, your technician might recommend voicing the hammers.
For a tone that is too loud, too bright or seems to die out too quickly, softening the hammers felt often is recommended. This is usually done by inserting needles into specific areas of the hammer to increase flexibility.
For a tone that is too weak or too mellow, hardening of the hammer felt may be necessary. This is usually done by filing away soft outer layers of hammer felt or by applying a chemical hardening solution.

Once the overall tone is correct, individual notes are voiced to make the tone as even as possible from one end of the keyboard to the other. In some pianos certain notes still may sound different from their neighbors, no matter how skillfully the technician voiced the piano. This most commonly occurs about an octave below middle C, where the strings change from steel wires wrapped with copper to plain steel. Such irregularities are a result of design compromises, and usually cannot be corrected by voicing.

Getting the most enjoyment from your piano

One of your piano's most important assets is its tone. Properly voiced, your piano can offer you a rich palette of music expression, and inspire good practice habits in every member of your family. However, piano owners are not always aware that tone can be customized to their own tastes and room acoustics, and to correct for deterioration and age. If the only service your piano has received is tuning, the sound can likely be improved by voicing.

How often should my piano be serviced?

Your piano is an investment in your future. It can bring you and your family a lifetime of music, adding immeasurable joy and beauty to your home. Since it is also such a large investment, it should be maintained with the utmost care. Regular servicing by a qualified technician will preserve your instrument and help you avoid costly repairs in the future.

Because your piano contains materials such as wood and felt, it is subject to change with climatic conditions. Extreme swings from hot to cold or dry to wet cause its materials to swell and contract, affecting tone, pitch, and action response or touch. You can reduce the severity of these effects by placing your piano near a wall away from windows or doors that are opened frequently. Avoid heating and air conditioning vents, fireplaces and areas which receive direct sunlight. Your piano will perform best under consistent conditions neither too wet nor dry, optimally at a temperature of 68 degrees F and 42 percent relative humidity.

While pianos generally fall into vertical and grand model categories, each manufacturer selects its own materials and utilizes its own unique scale and furniture designs. Every piano requires a different level of maintenance, depending upon the quality of materials used and the design and level of craftsmanship. Manufacturers can provide general advice on tuning frequency but your technician can give specific recommendations based upon your usage and locale.

What is meant by "humidity control"? Does my piano need this?

Your piano is made primarily of wood, a versatile and beautiful material ideal for piano construction. However, being made of wood, your piano is greatly affected by humidity. Seasonal and even daily changes in humidity cause wood parts to swell and shrink, affecting tuning stability and touch. Extreme swings in humidity can eventually cause wood to crack and glue joints to fail. Other materials in your piano also are affected by changes in moisture content in the air. The many felt and leather parts in your piano's action can change dimension, affecting regulation and friction, or stiffness of the touch. Very high humidity can even create condensation on metal parts such as strings, tuning pins and hardware, eventually causing them to rust.

How does humidity level affect my piano's tuning?

Swelling and shrinking of the piano's soundboard is the most immediate and noticeable effect of humidity change. The soundboard, a sheet of wood approximately 3/8 of an inch thick, is made with a slightly crowned shape. The strings pass over the soundboard and are connected to it by a wooden piece called a bridge. The upward crown of the soundboard presses the bridge tightly against the strings. As the moisture level in the soundboard increases during periods of high relative humidity, the crown expands and pushes the bridge harder against the strings. The strings are stretched tighter and the piano's pitch rises. Because this increase in crown is greater in the center of the soundboard than at the edges, the pitch rises more in the middle octaves than in the bass or treble registers. During periods of low relative humidity the soundboard shrinks, reducing the crown and decreasing pressure against the strings. The pitch drops, again with the greatest effect noticeable in the center of the keyboard. When relative humidity returns to its previous level, the average pitch of all the strings will return to normal, although the exact pitch of individual strings will be slightly changed from their original settings. Thus, a piano only will stay in tune as long as the relative humidity level in the air surrounding the soundboard remains constant. Extreme humidity changes require making greater changes in string tension to bring the piano into tune. This upsets the equilibrium between the string tension and the piano frame, and the piano never becomes stable.

What is relative humidity?

Wood swells and shrinks in response to changes in the relative humidity of the air around it. Relative humidity (RH) is the amount of moisture contained in the air, compared to the maximum amount of moisture that the air is capable of holding. The moisture content of air is affected by weather as well as conditions and activities within the home, while the moisture- holding capacity of air varies with temperature. One way of thinking about RH is that it is a measure of air's tendency to absorb or release moisture to its surroundings. Thus when the RH of air in a room increases, moisture will tend to transfer from the air to wood and other absorbent materials in the room. When the RH of air decreases, moisture will transfer from other materials back into the air. The RH of the atmosphere is always changing by the hour, and more dramatically, with the seasons. Consequently, the wood and felt parts in your piano are constantly changing dimension as they absorb and release moisture. Since RH depends upon the temperature and moisture content of the air, it is not possible to maintain a constant RH by controlling room temperature alone. In fact, maintaining an even temperature while moisture content varies will cause RH to change.

What can be done to minimize humidity problems?

Keeping the humidity level around your piano as constant as possible will help it stay in tune longer as well as slow such damage as soundboard cracks, loose tuning pins, and glue joint failures. The first and simplest precaution you can take is to position your piano away from areas where it would be exposed to extremes of temperature and humidity such as heating and cooling vents, stoves, doors and windows. Direct sunlight is especially damaging. If your home is not well insulated, an interior wall is preferable to an outside wall. Controlling the humidity within the home is another step you can take to preserve your instrument. In most areas of the country the relative humidity is very low during the cold winter season, and very high during the spring and summer. In other areas these humidity cycles are reversed. Wherever you live, you have probably noticed the symptoms of low RH (shocks from static electricity when sliding out of a car or after walking across carpet), and the signs of high RH (limp, soggy feeling newspapers and sticking doors). To monitor RH changes in your home, you may wish to purchase a moderately priced wall hygrometer available from most instrument supply companies or electronics stores. Use of a room humidifier during dry seasons will help somewhat. However, too much moisture added to a room during winter months can cause condensation to form on cold surfaces such as windows, eventually causing mildew, rot, and in extreme cases, damage to the building structure. During the humid season de- humidification is needed. If your humid season is winter, keeping the home evenly heated will help. However, humid summer situations require much more elaborate de- humidification systems. Unfortunately, it is seldom possible to adequately control the relative humidity of a piano by controlling the room environment alone. A very practical and effective answer to humidity problems is to have a humidity control system installed in the piano itself. These systems consist of three parts: a humidifier for adding moisture to the air, a dehumidifier for eliminating excess moisture, and a humidistat or control unit which senses the RH of the air within the piano and activates the system to add or remove moisture as needed. These systems are designed to maintain the RH of the air within the piano at the ideal level of 42%. The components are installed out of sight, inside the case of a vertical piano or under the soundboard of a grand. They are easy to maintain, and can be installed by your piano technician.

How will humidity control benefit my piano?

While not eliminating the need for regular piano maintenance, humidity control will allow more stable tunings by reducing the radical pitch changes your piano may experience through the seasons. When your piano stays closer to its correct pitch level of A440 (A-440 cycles per second), your technician does not have to perform a large pitch raising or lowering procedure prior to fine tuning. Thus, a balance of forces is maintained between the strings and the frame of the piano, allowing more accurate and stable tunings to be done.

In addition, a stable environment will help to preserve your piano through the years. Wood parts, glue joints, metal parts and your piano's finish will all last longer if not subjected to excessive humidity swings. Maintaining the correct environment will preserve your piano investment for a lifetime of enjoyment.

What do you recommend for cleaning my piano case, keys and soundboard?

The piano is unique among musical instruments because it also serves as fine furniture for the home. In fact, the term "piano finish" has traditionally been used to describe the highest standards in wood finishing. Properly maintaining that fine finish will enhance your home's decor and preserve the value of your piano.

Basic finish care

Modern Pianos are finished with a variety of materials, from traditional lacquer to modern polyurethanes and polyester resins. Whatever the material, a piano finish is designed to protect the wood from dirt and liquid spills, reduce the damaging effects of humidity changes, and -- in the case of clear finishes -- enhance the beauty of the wood.
Modern finishes are designed to do their job without the additional aid of polishes or waxes. In most cases, a piano finish is best maintained by simply keeping it clean and avoiding exposure to direct sunlight, extremes of temperature and humidity, and abrasion.

Avoiding finish damage.

Your piano's cabinet, like all woodwork, is subject to expansion and contraction with humidity changes. Excessive wood movement can eventually cause the finish to develop tiny cracks and even separate from the wood. Moderating the temperature and humidity swings around the piano will help to preserve its finish as well as its overall structure and tuning stability.
Locate the piano in a room with a fairly even temperature, away from drafts, dampness, and heat sources. ALWAYS AVOID DIRECT SUNLIGHT -- it will age the finish prematurely and cause color fading.
To prevent scratches, never set objects on your piano without a soft cloth or felt pad. Never place plants or drinks on a piano, because spillage and condensation can cause major damage.

Dusting your piano

Dust is very abrasive, and can scratch the finish if wiped off with a dry cloth. To avoid scratching, dust the piano lightly with a feather duster. Alternatively, wipe lightly with a soft damp cloth to pick up the dust, followed immediately with a dry cloth. The cloths should be soft cotton such as flannel, because coarse or synthetic fabrics can scratch some finishes. Wring out the damp cloth thoroughly so it leaves no visible moisture on the surface. To avoid creating swirl marks, always wipe with long straight strokes rather than circular motions. Wipe with the grain for natural wood finishes, or in the direction of the existing sheen pattern for solid-color satin finishes. Because some exposed parts inside your piano are fragile, it's best to let your technician clean these areas.

Cleaning the finish

To remove smudges and fingerprints, first dust using the damp/dry cloths as above. If heavier cleaning is necessary, dampen your cloth with a small amount of mild soap solution. A common product is Murphy's Oil Soap, available at most grocery and hardware stores.

To polish or not?

Before using polish on your piano, be sure it is actually necessary and beneficial. In general, most manufacturers recommend against using polishes because of the potential for damage to the finish and contamination of other parts of the instrument. Common household products such as "lemon oil" or inexpensive "furniture polish" should be avoided. Despite the labels' claims that they "protect" the finish or "feed" the wood, they offer no protection from scratching and can actually soften the finish if over-used. Worse, they often contain silicones and oils that contaminate the wood, complicating future refinishing or repairs. Silicone is especially dangerous because of its tendency to spread within the piano, sometimes causing extensive internal damage. Avoid aerosol products altogether since the over-spray can contaminate piano strings, tuning pins and action parts. An appropriate polish can help to restore luster to a dulled finish or reduce the tendency of some finishes to show fingerprints. However, it should be applied sparingly and infrequently, and all excess should be wiped clean with a soft dry cloth so no visible film remains. To prevent scratching, always dust before polishing. Specific recommendations follow.

Removing a heavy polish build-up

If your piano's finish appears gummy, oily, or streaked, it may be contaminated with too much or the wrong type of polish. Adding more polish will not correct this problem. Instead the finish should be thoroughly cleaned, then evaluated for any further treatment. To remove accumulations of old polish, use a cloth dampened with a mild soap as in item 3 above. Wring the cloth thoroughly to minimize wetting of the finish, and dry the surface immediately. Test a small area first to make sure the washing does not cause white marks or softening of an older finish. If stronger cleaning is necessary, look for a product called "wood cleaner and wax remover" at hardware or wood workers supply stores, or ask your technician for a suggestion. Once the original finish is clean, you can either leave it as is or enhance the gloss and clarity with an appropriate polish according to the finish type listed below.

Care of specific finish types

The two most common piano finishes are lacquer and polyester. Either material may come in clear, black, white, or other colors. Check your piano's owner information booklet to determine the type and recommended care of your piano's finish, or ask your technician or dealer for help if you're not sure.

Lacquer

Most, but not all, American-made pianos have lacquer finishes. They may be satin (dull sheen), semi-gloss, or high gloss. When cleaning or polishing a lacquer finish, avoid hard pressure on sharp corners and edges since the finish can easily wear through to bare wood.

Cleaning: For general dusting and cleaning of lacquer finishes, see items 2 and 3 preceding. Be especially careful to avoid scratching high gloss finishes by using only very soft, clean cloths and wiping with light pressure. For satin finishes, always rub in line with the existing sheen.

Polishing: Satin finishes are intended to be dull and will normally have a poor appearance if a gloss-producing polish is applied. If desired, a polish may be applied to gloss or semigloss finishes. Two common products are Guardsman Furniture Polish and OZ Cream Polish. Your technician may carry these or other products especially recommended for piano care. Note the precautions under item 4 regarding selecting and applying polishes.

Polyester

Most Asian and European pianos have polyester finishes in satin or high-gloss (called high polish). This material is harder and more scratch-resistant than lacquer, and best maintained by simple dusting and cleaning.

Cleaning: Use the same procedure as for lacquer.

Polishing: Satin polyester looks best when simply kept clean. Avoid gloss-producing polishes, which leave satin finishes looking shiny but scratched. High-polish polyester finishes need only be kept clean to maintain their gloss. However, high-wear areas such as the music desk may eventually develop a hazy appearance caused by many fine scratches. These areas can be buffed back to a high gloss using a product designed to remove tiny scratches from fiberglass boats or plastic windows in convertible cars. Two such products are Meguiar's Mirror Glaze #17 Plastic Cleaner, and Meguiar's s Mirror Glaze #9 Swirl Remover--available from marine supply, auto-parts, or automotive paint supply stores. Your technician may carry special products for this purpose, or can recommend a local source.

Finish Repairs

Dents. scratches, and chips sometimes occur, spoiling the appearance of an otherwise perfect finish. Such damage can usually be corrected by a specialist in "finish touch-up". Your piano technician may perform this service, or can offer a referral.

Cleaning Your Keys

Piano keys eventually become soiled with accumulated oil and dirt from fingers. To clean your white keys, use a soft cloth dampened with water and a small amount of mild soap. Avoid solvents. Make sure the cloth is thoroughly wrung out, and wipe the keys back-to-front rather than side-to-side, so excess moisture and dirt will not seep down the sides of the keys. Clean only a few keys at a time drying immediately with a clean cloth.
Ivory keys are porous, and excessive moisture can penetrate and loosen their glue joints. Also, a dirty or brightly colored cleaning cloth can transfer stains into the ivory.
Clean sharps in the same manner, but use a separate cloth for painted wooden sharps to avoid black stains on the white keys.

Finish Care Steps

Locate your piano to avoid direct sunlight as well as excessive temperature and humidity changes.
To avoid scratching, always remove dust first with a damp cloth or feather duster before wiping with a dry cloth.
Never place drinks, plants, etc. on the finish.
Avoid placing vinyl or rubber in contact with the piano.
Make sure that piano lamps, etc. have a felt-padded base.
Avoid touching piano strings with fingers or damp cloths.
Delicate parts inside your piano should be cleaned only by your technician.
Use polish sparingly, if at all.
Avoid aerosol products.
Read labels carefully, and avoid any product containing silicone.
Before playing, always wash your hands to prevent staining the sides and tops of the keys.